Please note that pool cover is not included.

The Auto Pool Reel

Regular price: $1,595.00 USD
Unit price: per

Select Pool Length

Select Pool Width *If you are unsure which length or
width to select, click on "Dimensions" in
the navigation menu below.

Cord Configuration *When viewed from behind reel, overlooking pool.

Plug Types Outside North America

Questions?

Read our FAQs

Call us at 905-882-7049

Email us at info@autopoolreel.com

Quantity must be 1 or more

Deploying the Cover (Covering the Pool)

1. Flip the switch “on”.
2. The pool cover deploys automatically, gliding onto the water on its own, and self-adjusting along the way.
3. No manual pulling, aligning, or adjusting is ever needed as the reel unwinds the pool cover.
4. Wait until the pool is completely uncovered. Then position the switch to then middle position to stop the cover.

Retracting the Cover (Uncovering the Pool)

1. Flip the switch “off”.
2. The pool cover retracts automatically, self-adjusting along the way.
3. No manual pulling, aligning, or adjusting is ever needed as the pool cover winds itself neatly around the reel.
4. Wait until the pool is completely covered. Then position then switch to the middle position to stop the cover.

Drive System

State-of-the-art Low voltage motors seamlessly deploy and retract pool cover within minutes

Smart Features

Patented edge-guide (self-guiding) technology

Self-adjusting/aligning technology corrects and re-adjusts pool cover as it retracts

Safety Features

No ropes/tethers/string/cables

Reel system can only be activated with switch

Can be easily secured to pool deck for additional protection against hazardous weather conditions

All electrical components are encased in protective housings made from durable impact-resistant plastic, and high-tempered precision aluminum

Width Options

Our adjustable telescopic tubes accommodate pool cover widths from 15’ to 20’ and 7.5’ to 15’. Pool cover widths less than 7.5’, will have a fixed rod and therefore, must be made with custom measurements.

Standard Width: for pool covers 15’ to 20’ wide

Reduced Width: for pool covers 7.5’ to 15’ wide

Length Options

This determines the length of the appendable feed strips that attach to either side of the cover.

Standard Length: for pool covers up to 40’ long

XL Length: pool covers up to 60' long and for pool width 15' or less

A-Frame End Supports: 19” wide x 10” deep x 14” high (excluding edge guide arms)

Adjustable Telescopic Tube: 3” diameter (length of telescoping tubes depends on the pool width selected)

Edge-Guides: 10” long

Cord Length: 22.5’ with 24V power adapter

*Made for 115-220V GFCI outlets

2 Year Limited Warranty

APR warranties this product to be free from defects in material or workmanship for a period of two (2) year following the date of purchase. The limited warranty does not cover failures due to abuse, accidental damage or when repairs have been made or attempted without the instructions of the APR team. If after inspection by APR, a part meeting warranty conditions is determined to be defective, APR will deliver a replacement, or replacement components, free of charge.

*The warranty registration form must be completed for the warranty to be valid. See full warranty for registration form and additional details.

Return Policy

Use the link below to access our full warranty and learn about our return policy. You’ll find information about returns at the bottom of the second page.

Click here for full warranty.

https://www.autopoolreel.com/warranty/APR_Warranty_2021.pdf

We offer domestic and international shipping from North America (Canada). Rates will vary. Check shipping rates by viewing your cart and selecting your location at the bottom of the page.